Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in East Los Angeles?
Gate installation in East Los Angeles typically runs $1,800 to $4,200 for a standard single swing gate with an automated opener, and $4,500 to $9,500 or more for a double driveway gate with a commercial-grade operator and access controls. A basic manual pedestrian or side-yard gate often lands between $900 and $1,800 installed, while large sliding gates with heavy-duty automation and intercom or keypad entry climb higher. These are real market ranges for East Los Angeles in 2026, not vague estimates – the final number depends on gate size, material, operator brand, and whether your property needs new footing, wiring, or access hardware.
We’re a gate specialist, not a general fence or garage door company. That focus matters here: when you’re pricing a new driveway gate in East LA, the automation is usually the single biggest swing in your total, and it pays to have a technician who already knows your operator brand quote the job. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems every week, and we install the same systems we repair. Whether your gate needs a targeted fix or a full replacement, we handle it start to finish. Call (833) 620-4315 for a free on-site estimate.
Gate Installation Cost Breakdown (2026)
Here’s how a full installation breaks down for the East Los Angeles market. You won’t pay every line item – most projects are a mix of gate fabrication, an operator, and access controls, plus site prep.
| Line Item | Typical Range (Installed) |
|---|---|
| Manual single swing gate (side yard, pedestrian) | $900 – $1,800 |
| Manual double driveway gate (no automation) | $2,200 – $4,800 |
| Swing gate operator (residential, single) | $1,400 – $2,600 |
| Dual swing operator setup (two leaves, paired) | $2,800 – $5,200 |
| Sliding gate operator (residential to light commercial) | $2,200 – $4,500 |
| Concrete footings, posts, and site prep | $400 – $1,500 |
| Low-voltage wiring run (power to operator) | $350 – $1,200 |
| Keypad or push-button entry | $250 – $650 |
| Safety sensors and photo-eyes | $200 – $500 |
| Intercom or video access system | $600 – $2,000 |
| Vehicle-loop or exit wand (auto-open) | $500 – $1,400 |
| Battery backup | $300 – $750 |
The material you choose moves the numbers more than anything else. Aluminum and steel hold their price in this climate; ornamental iron costs more upfront but lasts through decades of sun. Wood is the least expensive to buy and the most expensive to keep, especially here where it dries and warps. Operator brand also matters: a residential Mighty Mule or Ghost Controls setup keeps the automation line modest, while a commercial FAAC, BFT, or DoorKing operator pushing a heavy sliding gate can add thousands. If your driveway already has power run to the gate line, you’ll skip the wiring cost. If it doesn’t, that trench and low-voltage run is a real line item, and it’s the one most homeowners forget to budget for when they first price a gate in East Los Angeles.
What Affects Gate Installation Pricing in East Los Angeles
- Gate size and number of leaves. A single pedestrian gate is a different job than a 14-foot double driveway gate. Wider openings need heavier framing, stronger posts, and often paired operators that fall out of sync if they aren’t matched correctly.
- Material and finish. Aluminum, ornamental iron, steel, and wood all land at different price points, and finish choices (powder coat, galvanized, paint) add cost. Any material has to survive East LA’s dry summers and the occasional Santa Ana wind event, so we spec gates and posts for the wind load, not just the look.
- Operator brand and access controls. The automation is where most of the technical complexity lives – motors, control boards, sensors, and access systems. Wanting keypad, intercom, and phone-app entry on top of a basic operator adds real dollars, but it’s also what makes a driveway gate genuinely usable for a busy household or a small commercial lot.
- Site conditions. Hillside lots, uneven grading, and older properties with unmarked utilities can add prep time. On some East LA properties we’re trenching through compacted soil or re-routing around existing irrigation and gas lines, and that’s plumbing and electrical work around the gate, not just gate work.
- Permits and code requirements. Automated gate operators in California need to meet safety requirements – photo-eye sensors, proper entrapment protection, and in many cases a permit for the electrical connection. If your property is on a corner lot or near a right-of-way, the gate line and swing radius have setback rules you’ll want checked before fabrication starts.
- Power availability. If there’s an existing outdoor circuit near the gate, wiring is straightforward. If not, you’re running a new line from the house or panel, and the distance and trenching drive that cost up. Solar operators exist for properties where a trench isn’t practical, and we’ll tell you honestly when that’s the better call.
How to Save on Gate Installation
The biggest savings come from planning before you buy, not haggling after. A few things that consistently keep East Los Angeles gate projects on budget:
- Choose your operator to fit the gate, not the other way around. Buying a gate first and forcing a mismatched operator onto it is how you end up paying twice. Matching a lighter residential gate to a Ghost Controls or Mighty Mule operator, or a heavy commercial gate to a FAAC or DoorKing, keeps you from overbuying.
- Skip automation on the gate that doesn’t need it. A pedestrian side gate or a rarely used rear gate can stay manual and save you the entire operator line. Automate the driveway where it actually earns its keep.
- Bundle access controls into the install. Adding a keypad, sensor, or intercom during the original install is far cheaper than retrofitting them later, because the wiring and mounting happen once.
- Get the estimate on-site, not over the phone. A phone quote can’t see your slope, your soil, or your existing power. A real on-site estimate is the only one that won’t come back higher mid-job.
- Ask about the repair-versus-replace line. Sometimes a failing gate operator is a control board or sensor fix, not a full replacement – and a specialist who handles both will tell you which one you actually need.
We offer free estimates. Call (833) 620-4315 and we’ll walk your property, look at the existing gate line, and give you a number that holds.
FAQs – Gate Installation Cost
How much does a driveway gate cost to install in East Los Angeles?
A single automated driveway gate typically costs $1,800 to $4,200 installed, and a double driveway gate with a commercial-grade operator runs $4,500 to $9,500 or more. The gate panel and the automation are priced separately, so the biggest variable is which operator brand and access controls you choose. Call (833) 620-4315 for an exact quote – estimates are free.
Is it cheaper to repair my existing gate or install a new one?
Repair almost always costs less when the gate frame is sound and the operator is fixable – a sensor, control board, or motor issue is typically a few hundred dollars rather than a few thousand. A full replacement makes sense when the frame is rusted through, the posts are failing, or the automation is obsolete and parts are hard to source. We diagnose the root cause first and tell you which path is cheaper for your specific system. Call (833) 620-4315 and we’ll give you a straight answer.
Do I need a permit to install an electric gate in East Los Angeles?
In most cases, the electrical connection to an automated gate operator requires a permit, and operators must meet California safety code for entrapment protection with photo-eye sensors. Requirements can vary by property and right-of-way, so it’s worth confirming before fabrication. We factor permit and code requirements into every estimate. Call (833) 620-4315 to walk through what your property needs.
Can you install a gate on a property with no power at the gate line?
Yes. If running a trench and low-voltage line isn’t practical, we can quote a solar operator setup instead, which typically adds $300 to $1,500 depending on the operator and battery capacity. For most homes with an existing outdoor circuit, wiring the operator directly costs $350 to $1,200 and is the simpler path. Call (833) 620-4315 and we’ll tell you which fits your site.
How long does gate installation take?
A standard manual gate install is often a single-day job, while an automated driveway gate with new footings, wiring, and access controls typically takes two to four days depending on site prep and how long the operator takes to dial in. Special-order gate panels and iron fabrication can add lead time. Call (833) 620-4315 for a timeline based on your actual gate and operator.
Why a Gate Specialist Quotes Better Than a General Contractor
Most gate problems – and most gate surprises on a new install – come down to details a generalist doesn’t see. The operator that’s paired wrong for the gate weight. The post footing that’s too shallow for a heavy iron leaf. The control board wired for the wrong access device. Because we only do gates, we identify the root cause – motor, control board, sensor, or wiring – before recommending a single repair or install decision. That single-trade focus is why property managers and HOAs in East Los Angeles call us: we already know your brand, so we’re not learning on your job.
If you’re still deciding between a targeted fix and a full new build, our Gate Installation in East Los Angeles service page covers the full scope, and our home page lays out the repair and electric gate work we do alongside it. We’re happy to look at your current gate before you commit to anything.
Get Your Free East Los Angeles Gate Estimate
Whether you’re replacing a rusted driveway gate, adding automation for the first time, or pricing out Gate Installation services, we’ll come out, look at your site, and give you a real number in the East Los Angeles market. No guessing, no line-item surprises later. Call (833) 620-4315 for a free estimate and we’ll match the right gate and operator to your property.
Pricing reflects the East Los Angeles market as of 2026. Gate Repair East Los Angeles offers free estimates – call (833) 620-4315.
What Our Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Eduardo Herrera"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Allen Chen"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Xavier Freeman