Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pico Rivera, CA
Gate installation in Pico Rivera usually means replacing a sagging 1950s or 1960s tract-home gate that has finally given out after decades of San Gabriel Valley sun, Santa Ana winds, and clay soil movement. We install new automatic, sliding, and swing gates on the original concrete and older posts that dominate these tight lots, and we quote every job in writing before any work starts. If your driveway or side-yard gate won’t latch, won’t roll, or won’t hold square anymore, call (833) 620-4315 for a free estimate from a dedicated gate specialist.
Why Pico Rivera Homes Are Different
Pico Rivera is a densely built post-war tract suburb. Most homes are 1950s and 1960s single-story stucco on modest lots with narrow driveway aprons, which means gate work here is overwhelmingly about driveway and side-yard gates on aging sliding-track and swing hardware rather than custom ornamental iron. The sheer volume of near-identical vintage tract gates changes how we work: standardized track, wheel, hinge, and latch parts matter more than one-off fabrication, so we carry the common sizes and brands that these original gates used.
Hot, dry summers and Santa Ana events dry out and warp wood gates, loosen hinges, and accelerate rust on metal hardware. When the infrequent winter rains arrive, clay-heavy soils swell and shift gate posts, which throws alignment off and causes latches to stop catching. We see it constantly in these tight-lot tracts: a side-yard gate squeezed between the house wall and a block-wall property line that won’t latch usually traces to a settling post or a shifted block wall, not the hinge itself. The gate itself may be fine. The ground underneath it moved.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Pico Rivera Services
Two calls dominate our work in Pico Rivera: mechanical gate failures and electric operator failures. Both are covered below, and each has its own dedicated page.
Gate Repair in Pico Rivera
Most Pico Rivera gate failures we see are mechanical: worn rollers, rusted tracks, sagging posts, and latches that no longer line up. On these 1950s and 1960s tract homes, the original gate hardware has often been in service longer than the people living there. We diagnose the root cause before recommending anything, then we quote the repair in writing. Read more about our mechanical repair work on the Gate Repair in Pico Rivera page.
Electric Gate Repair in Pico Rivera
When a gate won’t open from the clicker or keypad, the problem is almost always in the operator motor, the control board, a sensor, or the wiring feeding it. Electric gate work is its own discipline, and we approach every automated system with the diagnostic depth it demands. We work on LiftMaster, FAAC, BFT, DoorKing, Mighty Mule, and the other major brands residents actually own. The Electric Gate Repair in Pico Rivera page covers the specifics.
Gate Installation in Pico Rivera
Most new gate installations in Pico Rivera replace a gate that was homeowner-installed decades ago, mounted on original concrete, and never quite square to begin with. Between the hot, dry summers that warp wood and the clay-heavy soil that shifts posts every winter, these original gates eventually reach a point where patching no longer makes sense. We install new automatic and manual gates sized for the narrow driveway aprons and tight side yards typical of these 1950s and 1960s tracts, with the track, hardware, and operator matched to the specific system. Our full Gate Installation service covers everything from the first measurement to the final code check.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open and close the driveway gate, or an old operator has failed and replacement parts no longer match the vintage hardware.
What it costs in Pico Rivera
Automatic gate installation in Pico Rivera typically runs from $2,800 to $9,500, depending on gate length, operator brand, and whether we’re reusing the existing posts or setting new ones.
How we do it
We measure the opening and gate weight, set or reinforce posts as needed, install the new gate and operator, run and protect all low-voltage wiring, program remotes and keypads, and test the full open-close cycle including safety entrapment protection.
Driveway Gate Installation
Signs you need it
Your current driveway gate has sagged past the point of repair, the post is pulled out of plumb by shifting soil, or you want a wider clear opening than the old setup allowed.
What it costs in Pico Rivera
Driveway gate installation in Pico Rivera generally falls between $2,400 and $8,800, with swing gates on flat aprons at the lower end and heavy sliding gates on track requiring new post footings at the upper end.
How we do it
We pull a straight line for the opening, set posts in concrete to the correct depth for Pico Rivera’s clay soil, hang the gate, install and level the track if it slides, and adjust the latch or lock for a square close.
Sliding Gate Installation
Signs you need it
Your lot’s narrow driveway apron leaves no room for a swing gate to arc inward, or an old sliding gate binds and jumps the track every time you use it.
What it costs in Pico Rivera
Sliding gate installation in Pico Rivera typically runs from $2,700 to $9,200, driven mainly by gate weight, the length of track required, and whether a new concrete track footing must be poured.
How we do it
We pour or repair the concrete track bed, set the track dead level, install guide rollers and stops, hang the gate, and set the latch so the gate parks square against the post every time.
What Gate Installation Costs in Pico Rivera
| Item | Typical range in Pico Rivera |
|---|---|
| Automatic gate installation | $2,800 – $9,500 |
| Driveway gate installation | $2,400 – $8,800 |
| Sliding gate installation | $2,700 – $9,200 |
Do I need a permit to install a gate in Pico Rivera?
Most residential gate replacements that reuse existing posts don’t require a permit in Pico Rivera, but new post footings or an enlarged driveway approach can trigger the city’s plan-check process. We check requirements for your specific property before quoting, so there are no surprises. Call (833) 620-4315 and we’ll verify what applies to your job.
How long does a full gate installation take in Pico Rivera?
A standard driveway or side-yard gate replacement usually takes one day on site, while automatic systems with new footings and full electrical runs can take two to three days including concrete cure time. We give you a written schedule with your quote. For a specific timeline on your gate, call (833) 620-4315 for a free estimate.
Brands We Service in Pico Rivera
We work on the gate brands Pico Rivera residents actually have: BFT and Linear operators on older tract installations, Viking and Ghost Controls on newer residential systems. Because we’re gate-only specialists, our technicians know these systems cold. Parts for common models are stocked on our trucks, which keeps most repairs to a single visit. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pico Rivera, CA
| Service | Typical range in Pico Rivera |
|---|---|
| Gate repair | $180 – $650 |
| Electric gate repair | $225 – $900 |
| Automatic gate installation | $2,800 – $9,500 |
| Driveway gate installation | $2,400 – $8,800 |
| Sliding gate installation | $2,700 – $9,200 |
Prices in Pico Rivera push toward the higher end when original posts are pulled out of plumb by the area’s clay-heavy soil and need to be reset or replaced, or when an old operator has to be swapped for a brand-matched board and motor retrofit rather than a simple repair. Whatever the scope, we quote the full price in writing and agree on it with you before any work begins.
Neighborhoods We Serve in Pico Rivera
We cover all of Pico Rivera, including the tract-heavy center of town and the surrounding residential streets that share the same era of construction. If you’re in one of these areas, we’re already working nearby.
- Downey Road corridor
- Whittier Boulevard corridor
- Rivera Park area
- North Pico Rivera
- South Pico Rivera
Most Pico Rivera service calls can be reached within a one-day window, and urgent gate failures are prioritized. Call (833) 620-4315 and we’ll give you a straight answer on timing.
Service Area – Cities Near Pico Rivera
Beyond Pico Rivera itself, we regularly serve the surrounding San Gabriel Valley and Southeast LA County communities. Our gate specialists cover Downey, CA, Whittier, CA, East Los Angeles, CA, and Monterey Park, CA, among others. If you’re just outside Pico Rivera, call us and we’ll confirm coverage for your street.
Serving Pico Rivera, CA – Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pico Rivera
We prioritize urgent calls in Pico Rivera, where a gate stuck open at night is a real security problem. Most service calls are reached within a day, and we always tell you an honest window when you call. For a gate that won’t close or won’t budge, call (833) 620-4315.
Some Pico Rivera neighborhoods have their own HOA or tract-specific standards for front-facing gates, especially on corner lots and streets with visible driveway approaches. We’re familiar with the typical requirements in the area and will flag anything you should confirm with your association before installation. A quick phone call gets you clear direction.
Yes. We schedule Pico Rivera jobs on a normal business-day calendar, and for many repair calls we can accommodate early or later arrival requests when you book ahead. Tell us your constraints when you call (833) 620-4315 and we’ll work it into the schedule.
Gate Repair East Los Angeles has served Pico Rivera since 2014, with a single focus on gates: repair, electric repair, and installation, across the brands this town actually has. Call (833) 620-4315 for a free estimate and a straight answer.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Pico Rivera Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Diego Morales"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Vikram Gupta"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Scott Ziegler