Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in East Los Angeles?
Gate repair in East Los Angeles typically costs between $150 and $850, depending on whether you’re fixing a manual swing gate or an automated system with a failed operator. Most residential repairs land in the $225 – $450 range. Electric gate repair runs higher, usually $350 – $1,200, because it involves the motor, control board, sensors, and access wiring, not just the gate itself.
We’re a gate specialist, not a general fence company. We work on your brand – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so the person showing up already knows your system before touching it. That matters when a $200 sensor swap could otherwise turn into a $900 parts-guessing session.
Key Takeaways
- Typical residential gate repair in East Los Angeles: $225 – $450.
- Electric/automated gate repair: $350 – $1,200, driven mostly by operator and control board work.
- Manual gate hinge, latch, and alignment fixes: $150 – $325.
- Brand-aware diagnosis cuts cost by avoiding wrong-part trips and repeat visits.
- Free estimates: call (833) 620-4315.
Gate Repair Cost Breakdown (2026)
Here’s how the numbers actually break down for East Los Angeles properties in 2026. These are real market ranges for the work, not teaser prices.
| Repair Type | Typical Cost Range |
|---|---|
| Manual gate hinge repair or replacement | $150 – $325 |
| Gate latch, handle, or alignment adjustment | $150 – $275 |
| Gate sagging / post reinforcement | $250 – $600 |
| Electric gate operator motor repair | $400 – $1,100 |
| Control board replacement | $350 – $850 |
| Safety sensor / photo-eye replacement | $225 – $475 |
| Access system / keypad / remote receiver repair | $275 – $650 |
| Wiring and low-voltage connection repair | $250 – $700 |
| Full gate installation (new build) | $2,200 – $6,500+ |
What pushes a job toward the top of those ranges? The brand and the age of the system. A Mighty Mule or Ghost Controls residential operator is a different repair than a DoorKing commercial unit or a FAAC swing operator feeding an HOA entrance. Older control boards with discontinued parts cost more because the fix is a replacement, not a component swap. South-facing gates on a sunny East Los Angeles lot also take a beating on plastic housings and sensor lenses, which is why we see a lot of cracked photo-eyes after hot summers. Busy properties where the gate runs dozens of times a day wear out motors and hinges faster than a quiet driveway, and that frequency shows up in the repair bill.
What Affects Gate Repair Pricing in East Los Angeles
- Manual vs. electric. A manual gate fix is mechanical: hinges, latches, posts, alignment. An automated system adds a motor, control board, sensors, and access wiring – each with its own failure point and its own line on the estimate.
- Brand and part availability. We service nine brands, from residential-grade Ghost Controls and Mighty Mule to commercial and HOA-grade FAAC, BFT, and DoorKing. Parts for widely installed brands are usually quick to source; discontinued boards push cost up.
- Root cause, not symptoms. A gate that won’t close could be a bad sensor, a misaligned hinge, a failing operator, or degraded wiring. We identify the actual cause before recommending a repair, so you’re not paying to replace a motor when the real problem was a $200 sensor.
- Property type. A single-family driveway gate in East LA is a different job than a multi-unit building or HOA entrance that has to stay operational for residents. Commercial and multi-user access systems take more diagnostic time.
- Age and wear. Heat, dust, and heavy daily cycles shorten the life of motors, hinges, and photo-eyes. A gate that’s been running for years without service usually has more than one issue stacked up.
- Access and location. Alley-facing gates, tight driveways, and properties with limited parking add setup time. It’s a small factor, but it’s real.
How to Save on Gate Repair
The biggest savings come from fixing the right thing the first time. A brand-knowledgeable specialist diagnoses the root cause – motor, control board, sensor, or wiring – before recommending a single repair, which is how you avoid paying twice for the same problem.
- Don’t wait on a small issue. A misaligned hinge or a sluggish operator gets cheaper to fix than a failed motor or a bent gate. Early repair beats full replacement almost every time.
- Service the sensors and hinges. Clean photo-eye lenses and lubricated hinges are low-cost maintenance that prevents larger repair bills down the road.
- Get the diagnosis in writing. Ask what failed and why before any repair is approved. A clear root-cause explanation tells you whether the price makes sense.
- Repair vs. replace. If your operator is older and discontinued, a targeted repair can still be the right call. We’ll tell you when a fix makes sense and when a full replacement is the better long-term spend.
We offer free estimates, so you know the number before any work starts. Call (833) 620-4315 and we’ll walk your system through it.
Does brand affect gate repair cost in East Los Angeles?
Yes. Brand affects both the part price and the diagnostic time. A widely installed LiftMaster or Linear residential operator usually means quicker, cheaper parts sourcing than a discontinued control board on an older commercial unit. We service nine brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so we’re not learning your system on the job. Call (833) 620-4315 for a free estimate on your specific brand.
FAQs – Gate Repair Cost
How much does gate repair cost in East Los Angeles?
Most gate repairs in East Los Angeles run $150 – $850, with typical residential fixes at $225 – $450 and electric gate repair at $350 – $1,200. The final number depends on whether it’s a manual or automated gate and which component failed. Call (833) 620-4315 for an exact quote – estimates are free.
Is it cheaper to repair or replace a gate?
Repair is almost always cheaper short-term – a $300 hinge or sensor fix versus a $2,200+ full installation. Replacement makes more sense when the gate structure is bent or the operator is old and discontinued, and repeated repairs start adding up. We’ll give you the honest comparison. Call (833) 620-4315 to talk it through.
Why is electric gate repair more expensive than manual gate repair?
Electric gate repair costs more – typically $350 – $1,200 versus $150 – $450 for manual – because an automated system has a motor, control board, sensors, and access wiring, each a separate failure point. The diagnostic work is deeper, and the parts cost more. That’s exactly what our electric gate specialization is for. Call (833) 620-4315 for a free estimate.
Can a failed control board be repaired instead of replaced?
Sometimes, but usually not – control board replacement runs $350 – $850, and board-level repair only makes sense when the fault is isolated and the board is still supported. On discontinued boards, replacement is the reliable path. We identify the root cause first so you’re not paying for a board when the real issue is wiring or a sensor. Call (833) 620-4315.
How much does a new gate installation cost in East Los Angeles?
A new gate installation runs $2,200 – $6,500+ depending on size, material, and whether it’s automated. Manual swing gates sit at the low end; electric driveway gates with access control sit higher. We handle installation alongside repair, start to finish. Call (833) 620-4315 for a free on-site estimate.
Why Choose a Gate Specialist
Gates are all we do. We’re not a general fence or home service company where gates are a side offering – the entire team focuses on gate repair, electric gate repair, and gate installation. That single-trade focus means faster, more accurate diagnosis, and a technician who already knows your brand’s common failure points instead of researching them mid-visit. Whether your gate needs a targeted fix or a full replacement, we handle it start to finish. Learn more about our Gate Repair in East Los Angeles service, or start at our home page to see what we cover.
Get a Free Gate Repair Estimate in East Los Angeles
If your gate is stuck, slow, or won’t respond, don’t guess at the repair bill. Call (833) 620-4315 for a free estimate. We’ll identify the root cause – motor, control board, sensor, or wiring – before recommending a single repair, and we’ll give you a clear price for your East Los Angeles property. Electric or manual, residential or commercial, we work on your brand.
Pricing reflects the East Los Angeles market as of 2026. Gate Repair East Los Angeles offers free estimates – call (833) 620-4315.
What Our Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Eduardo Herrera"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Allen Chen"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Xavier Freeman