Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for East Los Angeles Homeowners
A gate that won’t open, sags on its hinges, or fails to respond to the remote isn’t just an inconvenience. It’s a daily frustration that compromises your property’s security and your family’s routine. Gate Repair East Los Angeles specializes in full gate installation across East Los Angeles, from straightforward manual driveway gates to fully automated electric systems with intercom and keypad access. Led by Ruben Acosta, our team has installed and serviced LiftMaster, FAAC, BFT, and Linear systems throughout the neighborhood. We work on your brand. Call (833) 620-4315 for a free estimate, and we’ll quote the job before any work begins.
Automatic Gate Installation
Automatic Gate Installation means replacing or building a gate that opens and closes without you ever leaving your car, powered by an operator motor and controlled by remote, keypad, telephone entry, or vehicle sensor. In East Los Angeles, where driveways often open directly onto busy streets, an automatic gate gives you security and convenience that a manual gate simply can’t match. Gate Repair East Los Angeles installs automatic gates for single-family homes, duplexes, and multi-unit properties, wiring everything from the operator arm to the safety sensors and access panel. Most Gate Installation pricing in East Los Angeles runs from $3,500 to $12,000 depending on gate size, motor type, and access system. We quote the full price up front, and it’s agreed before any work starts.
Operator Selection by Property Type
Residential driveways often use a swing arm or ram operator from LiftMaster or Linear. Commercial entries and larger gates typically need a more powerful FAAC or BFT hydraulic or electromechanical operator. We match the motor to the gate weight, cycle frequency, and power availability at your property.
Safety Compliance
Automated gates require photo eyes, contact edges, and in some cases warning signage to operate legally and safely. We wire every installation to current UL 325 standards, which means the gate reverses if it encounters an obstacle. This is not optional, and we don’t cut corners on it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
East Los Angeles Gate Installation services cover everything from hanging a new single-swing driveway gate to building a complete steel vehicle entrance from scratch. You need this service when your existing gate is beyond repair, when you’re building new construction, or when you want to upgrade from a manual gate to a powered one. Gate Repair East Los Angeles handles the full job: measuring the opening, setting posts, welding or assembling the gate frame, mounting hardware, and finishing with your choice of material. Basic manual gate installation in East Los Angeles typically costs $2,000 to $6,000, while larger or custom work lands higher. Every quote is itemized and agreed before we start.
Swing and Slide Systems
Single-swing gates work well on flat driveways with space for the gate to arc inward. Slide gates are the better choice when the driveway slopes upward or when there’s no room for a swinging leaf. We’ll tell you which system suits your property, not just sell you the more expensive option.
Post Setting and Foundations
A gate is only as solid as its posts. We set posts in concrete to a depth that matches the gate’s weight and wind load, which in East Los Angeles means accounting for the strong afternoon gusts that come through the hills. Undersized posts fail within a year or two. We size them correctly on day one.
Electric Gate Installation
Electric Gate Installation is the process of adding a powered operator system to a new or existing gate, including the motor, control board, receiver, safety devices, and access controls. If you’re tired of getting out of your car to open the gate every time you come home, or if you manage a property where tenants need controlled entry, this is the service you need. Gate Repair East Los Angeles specializes in electric gates: operators, control boards, sensors, and access systems are our core trade, not a side offering. Electric gate installation in East Los Angeles ranges from $3,000 to $10,000 depending on the operator type, wiring distance, and access control complexity. Your price is set before we begin, and there are no surprise invoices.
Control Board and Access Integration
The control board is the brain of the system. We install and program boards from LiftMaster, FAAC, BFT, and Linear, and we set up your remotes, keypads, and intercom so everything talks to each other on day one. We also handle telephone entry systems for apartment buildings and commercial yards.
Sensor and Safety Edge Wiring
Electric gates need photo eyes and reversing edges to prevent injury. We run the wiring in conduit, splice connections inside weatherproof boxes, and test the reversal function before we call the job done. This is the difference between a gate that works for years and one that faults out every few weeks.
Driveway Gate Installation
Driveway Gate Installation is the complete build and mounting of a gate across the vehicle entrance to your property, whether manual or automatic. For most East Los Angeles homeowners, it’s the single biggest security upgrade you can make to the front of your property. Gate Repair East Los Angeles has installed driveway gates in neighborhoods from City Terrace to Belvedere, and we know the common challenges: narrow right-of-ways, steep approaches, and old retaining walls that complicate post placement. A standard driveway gate installation in East Los Angeles runs $2,500 to $8,000 for a manual gate and $5,000 to $14,000 for a fully automated setup. The quote is fixed and approved by you before materials are ordered.
Material Choices for East LA Driveways
Powder-coated steel is the most common choice: it’s strong, resists rust, and holds up to the marine layer that rolls through East Los Angeles. Aluminum is lighter and costs more up front, but it never corrodes. We’ll show you both options with real pricing, not brochure estimates.
Driveway Slope and Rolling Gates
If your driveway slopes up from the street, a rolling gate that runs on a track may be the only workable option. We fabricate and install rolling gate systems that ride above the ground on wheels, so a dirt or gravel driveway won’t jam the mechanism. Slopes are handled, not avoided.
Sliding Gate Installation
Sliding Gate Installation is a gate that moves horizontally along a track or cantilever rail instead of swinging open, ideal for driveways with limited swing room or steep grades. In East Los Angeles, many older homes sit on raised lots with short, steep driveways where a swing gate physically cannot open inward or outward. A sliding gate solves that. Gate Repair East Los Angeles installs both track-style and cantilever sliding gates, with operators from FAAC, BFT, and Linear when you want automation. our Gate Installation in Monterey Park and East Los Angeles typically costs $4,000 to $12,000 depending on gate width, track length, and motor selection. We quote the complete job, hardware and labor included, before any work begins.
Cantilever vs. Ground Track
Cantilever gates ride on rollers attached to posts and never touch the ground, so dirt, gravel, and debris won’t block the gate. Ground-track gates use a V-track rail embedded in the driveway and are simpler and cheaper where the ground is smooth. We assess your site and recommend the system that will actually keep working in East Los Angeles conditions.
Horizontal Clearance Requirements
A sliding gate needs wall or fence space beside the opening equal to at least the width of the gate itself. Some East Los Angeles properties don’t have that clearance, in which case a bi-parting slide gate, which splits into two leaves, is the answer. We measure carefully before recommending anything.
Gate Opener Installation
Gate Opener Installation is adding a motorized operator to an existing gate that was previously manual, or replacing a failed operator on a gate that’s already automated. If you already have a solid gate and just want it automated, this is the most cost-effective path. Gate Repair East Los Angeles installs gate openers from LiftMaster, FAAC, BFT, and Linear, and we work on your brand specifically rather than forcing you into whatever model we have in the truck. Opener installation in East Los Angeles ranges from $1,800 to $4,500 for residential systems, and higher for commercial-grade operators with complex access control. The price is fixed and approved before installation day.
Retrofit Openers for Existing Gates
Most manual gates can be retrofitted with an opener, as long as the hinges and posts are in good shape. We inspect the existing gate, confirm the post strength, and only recommend an opener if the gate can handle the torque. Some openers are better suited to heavy gates than others, and we match that correctly the first time.
Remote Programming and Receiver Setup
We program every remote, keypad, and vehicle sensor in front of you, and we walk you through how to add or delete codes yourself. You shouldn’t need a service call just to add a new remote. We leave the system with you able to manage your own access.
Gate Fabrication
Gate Fabrication is building a gate to your property’s exact dimensions and material specs, rather than adapting a stock gate to fit. East Los Angeles has a mix of pre-war bungalows, mid-century ranches, and newer infill construction, and the driveway openings vary just as much. A stock gate rarely fits properly. Gate Repair East Los Angeles fabricates gates to order: steel, aluminum, solid panel, picket style, or custom designs with your preferred spacing and hardware. Custom gate fabrication in East Los Angeles typically runs $2,500 to $9,000 before automation, depending on size, material, and design complexity. Your quote includes the fabrication, finish, hardware, and installation.
Custom Sizing and Design
We build gates for odd-width openings, tall gates, and properties where the fence line isn’t square. You choose the style and we build to the inch, not to the nearest stock size. This matters on older East Los Angeles lots where driveway openings were built before standardized codes existed.
Powder Coating and Finish Options
We offer powder-coated finishes in black, bronze, white, and custom colors, baked on for a finish that stands up to sun and salt air. A properly coated steel gate lasts 15 years or more without repainting. We also do galvanized steel for coastal properties and commercial sites that need maximum corrosion resistance.
Brands We Service
Gate Repair East Los Angeles works on three of the most common gate operator brands in Southern California: LiftMaster, FAAC, and BFT. LiftMaster is the most widely installed residential operator brand in East Los Angeles, and we’ve replaced hundreds of their swing and slide opener motors, control boards, and remote receivers. We stock their common parts and can often diagnose a LiftMaster issue from the symptom over the phone before we even arrive.
FAAC and BFT are the workhorses of commercial and multi-unit properties, and we service both brands on gates, barrier arms, and vehicle detection loops. Whether you have a FAAC hydraulic operator on a commercial yard gate or a BFT swing operator on an apartment entry in East Los Angeles, our technicians know the wiring, the programming, and the failure points. If you have another brand, we can help with that too; call us and we’ll tell you straight whether we service it.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate won’t open or close at all. A completely dead gate usually means a failed control board, a burned-out motor, or a broken power supply. Continuing to force the gate manually can damage the operator further and costs you more in the long run.
- The gate opens halfway and reverses. This is a classic safety sensor issue, either misaligned photo eyes or a faulty reversing edge. It’s also a sign that the control board is misreading sensor input, which requires a multimeter to diagnose correctly.
- You hear a grinding or clicking noise when the gate moves. Grinding means the drive chain, gearbox, or motor bearings are failing. Clicking usually points to a relay or capacitor problem on the control board. Both are cheaper to fix now than after the part fails completely.
- The gate sags or drags on the ground. A sagging gate means failing hinges, bent posts, or a damaged frame. Running an automated opener on a sagging gate puts massive strain on the motor and will destroy the operator if left unaddressed.
- The remote works intermittently or only at close range. This could be a failing receiver board, weak remote battery, or interference from nearby radio equipment. If replacing the battery doesn’t fix it, the problem is in the receiver or antenna, and that’s a bench-level repair.
Our Process, Step by Step
- 1
Site assessment and measurement. We measure the driveway opening, check the grade, inspect existing posts and fence line, and discuss how you want the gate to function. This takes about 30 minutes at your East Los Angeles property and the estimate is free.
- 2
Written quote with line-item pricing. You get a fixed price for the gate, hardware, operator, wiring, and labor, broken down so you can see exactly what you’re paying for. We don’t start any work until you approve the quote in writing.
- 3
Post setting and gate fabrication. We dig and pour concrete footings, set the posts, and build or order your gate to the measured dimensions. Materials are ordered only after the quote is signed, and we’ll tell you the lead time for fabrication up front.
- 4
Mounting, wiring, and automation. We hang the gate, mount the operator, run the wiring in conduit, install safety sensors, and program remotes, keypads, and any intercom system you’ve chosen.
- 5
Testing and walkthrough. We cycle the gate at least ten times under load, test the safety reversal, and then walk you through operation, programming, and basic maintenance. You get our direct number for any follow-up questions.
How Much Does Gate Installation Cost in East Los Angeles?
A typical manual driveway gate installation in East Los Angeles runs $2,500 to $6,000, while a fully automated swing or slide gate ranges from $5,000 to $14,000 depending on size, material, operator brand, and access controls. Your price is driven by four factors: gate width and weight, which determines the operator size; material choice, with aluminum costing more than steel; access control complexity, meaning whether you want a simple remote or a full keypad and intercom system; and site preparation, including any concrete work, post replacement, or fence repairs needed before the gate goes in.
The best way to avoid overpaying in East Los Angeles is to get line-item quotes from at least two companies and compare what’s actually included. Some companies quote a low gate price and then add charges for the operator, sensors, post work, and programming. Our quotes include everything: the gate, the hardware, the operator if applicable, the safety equipment, and the labor. The free estimate is detailed and the price we quote is the price you pay.
Our Service Area Near East Los Angeles
Gate Repair East Los Angeles serves the neighborhoods and communities throughout East Los Angeles and the surrounding area, including Downey, South Gate, El Monte, Norwalk, Compton, Monterey Park, Whittier, West Covina, Pico Rivera, Florence-Graham, and Lynwood. For properties in East Los Angeles proper, we’re typically on site within a few days of your call. For surrounding cities, scheduling runs within the week.
Serving East Los Angeles, CA – Our Local Coverage Area
We’re based in the East Los Angeles area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in East Los Angeles
Gate installation is the process of building and mounting a gate at your property’s vehicle entrance, which includes setting posts, fabricating or assembling the gate, mounting it on appropriate hardware, and optionally wiring an automatic operator. In East Los Angeles, Gate Repair East Los Angeles handles both manual and electric gate installation. Our team led by Ruben Acosta measures, builds, wires, and tests the complete system.
Most residential gate installations in East Los Angeles take one to two days on site. The timeline depends on whether posts need to be set in concrete, which requires a day for the concrete to cure before the gate is mounted. Custom fabrication can add one to two weeks before the installation day.
Gate installation in East Los Angeles typically costs between $2,500 and $14,000 depending on the gate size, material, and whether it’s manual or automatic. Manual driveway gates run $2,500 to $6,000, while fully automated gates with remote access range from $5,000 to $14,000. Call (833) 620-4315 for an exact quote; estimates are free.
Yes, Gate Repair East Los Angeles services and installs LiftMaster gate operators, which are among the most common automated gate systems in East Los Angeles. We stock common LiftMaster parts, including control boards, remote receivers, and operator arms. We also work on FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
If your gate is stuck open and your property is unsecured, call us at (833) 620-4315 and we’ll tell you the soonest we can get a technician out. While emergency repair is available, new gate installation is generally scheduled after a site measure and material order. We can secure an opening temporarily in some cases while your new gate is being fabricated.
We stand behind our installation workmanship, and manufacturer warranties apply to all operator motors, control boards, and hardware we install. The specific warranty period depends on the brand and model. We’ll spell out exactly what’s covered before you sign anything.
Before your installation date, clear vehicles away from the driveway so we have full access to the work area, and let us know if you have pets that need to be kept inside. If a fence post or wall needs repair, we’ll flag it during the site measure. We handle all the permitting questions and utility marking.
Schedule Your Gate Installation Service in East Los Angeles Today
Whether you need a new manual gate or a fully automated LiftMaster or FAAC system, Gate Repair East Los Angeles has the team and the parts to get it done right. Ruben Acosta and our crew will measure, quote, and install with no surprises. Call (833) 620-4315 now for a free, no-obligation estimate on your Gate Installation in East Los Angeles.
Written by Ruben Acosta, Owner at Gate Repair East Los Angeles, serving East Los Angeles and surrounding communities.