Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in South Gate, CA
Gate installation in South Gate usually means replacing a decades-old chain-link or wrought-iron driveway gate on a mid-century stucco home, and the job has to account for compact lots, tight driveway clearances, and city setback rules that vary block to block. We’re Gate Repair East Los Angeles, and we’ve served South Gate since 2014 as a dedicated gate specialist, not a general home services company. From a sagging manual gate on Tweedy to a full automatic gate installation with a LiftMaster or BFT operator, we handle the entire job, start to finish. Call (833) 620-4315 for a free estimate.
Why South Gate Homes Are Different
South Gate’s housing stock is dominated by 1940s through 1970s single-family stucco homes on narrow lots, most of which still have their original or first-replacement driveway gates. Those gates are typically manually operated or lightly automated chain-link and wrought-iron units that have been swinging open and closed for thirty, forty, sometimes fifty years. The hardware wears out. The posts settle. The latch stops lining up.
The climate plays a direct role. South Gate’s hot, dry summers and Santa Ana winds pull moisture out of wood gates, warping frames and causing seasonal binding. Winter rain swells the wood and loosens posts in the sandy, sometimes poorly draining soils around the area, so a gate that closed cleanly in October may drag against the ground by January. In the dense tract neighborhoods off Firestone and Tweedy, gates on compact lots are also constantly clipped by vehicles backing out of narrow driveways. Bent hinges and misaligned latches are the most common calls we take in South Gate, and they’re usually repairable without replacing the entire gate. We identify the root cause, motor, control board, sensor, or wiring, before recommending a single repair.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main South Gate Services
South Gate homeowners and property managers call us most about two things: a gate that won’t open or close properly, and an electric gate that has stopped responding altogether. Here’s how each works in South Gate.
Gate Repair in South Gate
Most South Gate gate repair calls involve sagging posts, worn hinges, and latch alignment on aging residential gates. The soil shifts with rain and drought, the hardware fatigues from decades of use, and the result is a gate that scrapes the driveway or won’t stay latched. We repair the gate in place when the structure is sound, which keeps costs down and preserves the original look of a mid-century home. For a full breakdown of what to expect, see Gate Repair in South Gate.
Electric Gate Repair in South Gate
When an automated gate in South Gate stops opening, the problem is almost always the operator motor, the control board, a sensor, or the wiring between them. Diagnosing this correctly takes brand-specific knowledge, because a Mighty Mule opener and a BFT operator fail in very different ways. We work on your brand, and we find the root cause before recommending a single repair. For more on how we diagnose and fix automated systems, see Electric Gate Repair in South Gate.
Gate Installation in South Gate
Gate installation in South Gate usually means replacing a decades-old chain-link or wrought-iron driveway gate on a mid-century stucco home, and the job has to account for compact lots, tight driveway clearances, and city setback rules that vary block to block. Because the housing stock here runs heavily to 1940s through 1970s single-family homes on narrow lots, most replacement gates are manual or lightly automated residential units, not high-end commercial or estate automation. The climate also shapes the work: hot, dry summers and Santa Ana winds dry out wood gates and warp frames, while winter rain swells wood and loosens posts in the sandy, often poorly draining local soil. We plan for that seasonal movement when we set posts and choose hardware, so the gate stays aligned through South Gate’s wet-dry cycle. As a dedicated gate installation and repair specialist, we handle the entire job: Gate Installation from demolition and post setting to final latch alignment and operator programming. Whether your gate needs a targeted fix or a full replacement, we handle it start to finish.
Automatic Gate Installation
Signs you need it
You’re physically getting out of the car to open and close a manual driveway gate every day, or you have a gate that’s too heavy, too wide, or too rusted for a practical manual retrofit.
What it costs in South Gate
Automatic gate installation in South Gate typically runs $2,000 to $6,500, depending on the operator brand, gate weight, and whether low-voltage power needs to be run under the driveway.
How we do it
We remove the old gate if needed, set and reinforce the posts, hang the new gate, then install and program the operator, sensors, and access system specific to your brand.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted through at the bottom rail, the posts lean inward, the hinges are tearing out, or the gate simply no longer lines up with the latch.
What it costs in South Gate
A new manual driveway gate in South Gate typically costs $900 to $2,500 installed, while an automated driveway gate with operator runs $2,000 to $5,500.
How we do it
We measure the opening and check local setback rules, remove the old gate and hardware, set new posts in concrete, hang the gate, and align the latch and auto-operator if included.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the street and a swing gate bottoms out, or the lot is too compact for a gate that swings into the driveway and blocks a parked car.
What it costs in South Gate
Sliding gate installation in South Gate typically runs $2,500 to $7,000, depending on gate width, track or cantilever hardware, and operator brand.
How we do it
We build up the track base or set cantilever rollers, hang the gate, then install the linear operator, safety sensors, and any keypad or intercom access system.
What Gate Installation Costs in South Gate
| Item | Typical range in South Gate |
|---|---|
| Manual driveway gate, installed | $900 – $2,500 |
| Automatic driveway gate with operator | $2,000 – $5,500 |
| Sliding gate with operator | $2,500 – $7,000 |
The price is quoted and agreed before any work starts, so there’s no surprise on the invoice. The factors that move the number in South Gate are gate width, whether you choose steel or aluminum, the operator brand you want, and how much site prep the posts need.
Do I need a permit to replace my driveway gate in South Gate?
Maybe. South Gate has an active residential permit culture, and replacement gates often need to match setback and height rules that vary block to block. We check the requirements for your specific address before quoting, so you’re not stuck correcting a permit problem after installation.
Can you match an automatic gate to an older South Gate home’s style?
Yes. We work with steel and aluminum profiles that suit mid-century stucco homes, including simple horizontal-rail designs and classic wrought-iron styles. The operator is mounted discreetly, so the gate still reads as period-appropriate. Call (833) 620-4315 for a free measure and written quote.
Brands We Service in South Gate
We service BFT, Linear, Viking, and Ghost Controls systems in South Gate, among others. We carry common control boards, sensors, and remotes for these brands locally, which means many electric gate repairs are completed in a single trip. Learn more about our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in South Gate, CA
| Service | Typical range in South Gate |
|---|---|
| Manual driveway gate, installed | $900 – $2,500 |
| Automatic driveway gate with operator | $2,000 – $5,500 |
| Sliding gate with operator | $2,500 – $7,000 |
| Gate repair, minor (hinge, latch, alignment) | $150 – $400 |
| Gate repair, major (post reset, frame section replacement) | $400 – $1,200 |
| Electric gate repair, sensors and remotes | $150 – $450 |
| Electric gate repair, operator motor or control board | $400 – $1,200 |
| Full operator replacement | $800 – $1,800 |
In South Gate, the biggest price drivers are the age of the existing hardware and whether the posts have settled enough to need resetting, plus the operator brand on electric systems, some boards cost far more than others. We quote the full price upfront and you approve it before we turn a wrench.
Neighborhoods We Serve in South Gate
We cover all of South Gate, ZIP 90280, including the older tract homes around Tweedy, Firestone, and the residential streets between Long Beach Boulevard and the 710. Response is typically same-day or next-day depending on our current schedule.
- South Gate Park area
- Stanford Avenue corridor
- Hollydale
- Tweedy corridor
- Firestone Boulevard district
Service Area – Cities Near South Gate
We also serve the surrounding communities in southeast Los Angeles County. If you’re in Lynwood, CA, Florence-Graham, CA, Downey, CA, or Compton, CA, we can schedule a gate repair or installation with the same brand-specific approach we use in South Gate.
Serving South Gate, CA – Our Local Coverage Area
We’re based in the South Gate area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in South Gate
We schedule South Gate jobs same-day or next-day in most cases, depending on how many calls are already in the queue. Emergency calls, like a gate stuck open on a busy street or an electric gate that won’t close, take priority. Call (833) 620-4315 and we’ll give you an honest arrival window.
Yes. We work on shared driveway and pedestrian gates at small multi-unit properties across South Gate, where heavy traffic plus the same post-settling soil issues mean more frequent hinge, latch, and operator failures. Property managers get a written quote before any work starts.
Yes. We cover all of 90280, including the neighborhoods off Tweedy, Firestone, and Long Beach Boulevard. There’s no minimum job size, and estimates are free. We also cover nearby cities like Lynwood, Florence-Graham, Downey, and Compton.
If your gate is sagging, stuck, or not responding, call Gate Repair East Los Angeles at (833) 620-4315 for a free estimate. We’re a dedicated gate specialist serving South Gate since 2014, and we’ll tell you exactly what’s wrong and what it costs before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What South Gate Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Vikram Gupta"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Scott Ziegler"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Eduardo Herrera