Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lynwood, CA
Gate installation in Lynwood usually means one of two jobs: replacing an old wrought-iron pedestrian gate on a 1950s stucco tract home, or putting in an automated driveway slide gate on a narrow lot where every inch of frontage matters. We do both, plus the electric work that makes the gate actually open when you press the button. Most Lynwood calls we get start because a gate has sagged past the point where adjusting hinges makes sense, or because a homeowner wants to convert a manual driveway gate to an automatic one. Call us at (833) 620-4315 and we’ll walk you through what your specific setup needs.
Why Lynwood Homes Are Different
Lynwood’s housing stock dates mostly to the post-WWII boom: compact stucco homes on tight lots, many with original or add-on wrought-iron fencing and driveway gates that open directly onto the street or a shared side drive. These are not decorative garden gates. On a 90262 lot where the front door sits maybe fifteen feet from the sidewalk, the gate is the first real barrier between your family and the street, which is why a broken latch or a slide gate that’s jumped its track reads as a security problem, not a weekend project.
The climate does something specific here, too. Lynwood’s long dry summers shrink and shift the soil around gate posts. We regularly see posts that were plumb when they were set years ago now leaning half an inch out, which throws off the latch, binds the hinges, and makes a slide gate scrape or jam. Because lots are narrow and driveways often run along a shared property line, a sagging slide gate can block a neighbor’s access to their own driveway. That changes the math: in Lynwood, re-leveling posts and resetting tracks is often the right fix, not replacement. And many older iron gates here carry layers of repaint that hide failing welds and worn roller hardware until the gate actually stops moving.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Lynwood Services
Most Lynwood homeowners call us about one of two things: a gate that won’t open or close correctly, or an electric gate whose motor, board, or sensors have stopped responding. Here’s how each works.
Gate Repair in Lynwood
On Lynwood’s older lots, gate repair usually means dealing with hardware that’s been in place for decades: sagging posts, worn hinges, latches that no longer line up, and slide tracks that have shifted with the soil. We start by finding the root cause, not by throwing parts at the problem. A gate that drags might be a post lean issue, a bent roller bracket, or a hinge that’s slowly pulled out of the stucco. We carry the common hardware for these older iron and tube-steel gates, and we’ll tell you honestly whether a targeted fix makes sense or whether the gate has reached the end of its serviceable life. Details on what we fix are on our Gate Repair in Lynwood page.
Electric Gate Repair in Lynwood
Automated gates fail differently than manual ones. Sometimes it’s the operator motor, sometimes the control board, sometimes a photo-eye sensor that’s been knocked out of alignment, sometimes a wiring run that’s been chewed or pinched. We work across the major automation brands you’re likely to have on a Lynwood property – LiftMaster, FAAC, BFT, DoorKing, Mighty Mule – so the technician who shows up already knows your system’s wiring logic and common failure points. That matters on older slide gates where the original installer may be long gone and the control wiring was added in pieces over the years. Read more on the Electric Gate Repair in Lynwood page.
Gate Installation in Lynwood
Gate installation in Lynwood is as much about the ground under the gate as the gate itself. Narrow lots, shared driveways, and decades of soil movement mean a new gate has to be set on posts that won’t lean, with tracks that won’t bind, and with enough clearance to swing or slide without clipping a neighbor’s fence. We install manual and automated gates, from wrought-iron pedestrian gates to driveway slide gates with operators, and we handle the whole job – fabrication, posts, hardware, and the automation if you want it. For a fuller look at the service, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the driveway gate, or your manual gate is getting heavier to move each year.
What it costs in Lynwood
Electric gate installation in the area typically runs $2,800 to $8,800 depending on gate size, operator type, and access-control features.
How we do it
We set the operator and gate posts, hang the gate, mount the motor and control board, run the low-voltage wiring, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
Your current driveway gate no longer closes fully, the frame is bent or rusted through, or you want a gate where none exists to secure the driveway.
What it costs in Lynwood
Driveway gate installation in 90262 typically falls between $1,500 and $7,500, with slide gates at the upper end.
How we do it
We measure your driveway opening, set posts or a track, install the gate panel, and adjust it so it moves cleanly without scraping or binding.
Sliding Gate Installation
Signs you need it
Your lot is too tight for a swing gate, or your existing slide gate repeatedly falls off its track because the ground has shifted.
What it costs in Lynwood
Sliding gate installation in Lynwood starts around $2,200 and typically tops out near $9,500 for automated models with access control.
How we do it
We lay a level track on compacted base, set the post and receiver, hang the gate, and adjust the rollers so it glides without hanging up.
What Gate Installation Costs in Lynwood
| Item | Typical range in Lynwood |
|---|---|
| Manual driveway gate installed | $1,500 – $5,500 |
| Sliding gate installed | $2,200 – $9,500 |
| Electric gate operator and controls | $1,800 – $4,500 |
These are the figures we quote from before any work starts. The price you agree to is the price you pay, and we review the full line-item quote with you before ordering any material.
How long does a gate installation take in Lynwood?
Most Lynwood gate installations take one to two days on site. Post setting, concrete cure, and automation programming are the variables that can stretch a job, but we confirm the schedule before we start.
Can you install a gate on a shared driveway in Lynwood?
Yes. We regularly install gates on Lynwood’s shared side drives. We check the property line, set the gate so it doesn’t swing into a neighbor’s path, and make sure the track or swing arc stays inside your side of the clearance. Call (833) 620-4315 for a site assessment.
Brands We Service in Lynwood
Our technicians work on gate systems from FAAC, BFT, Linear, and Viking, along with LiftMaster, DoorKing, Elite, Mighty Mule, and Ghost Controls. We keep the most common control boards, sensors, and operator parts in the truck, which means most Lynwood repairs don’t wait on a parts shipment. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lynwood, CA
| Service | Typical range in Lynwood |
|---|---|
| Gate repair (manual hinge, latch, sag fix) | $150 – $600 |
| Electric gate troubleshooting and sensor repair | $150 – $450 |
| Control board replacement | $300 – $900 |
| Operator motor replacement | $450 – $1,500 |
| Manual driveway gate installed | $1,500 – $5,500 |
| Sliding gate installed | $2,200 – $9,500 |
| Full electric gate installation | $2,800 – $8,800 |
| Pedestrian gate installed | $600 – $2,500 |
What pushes a Lynwood job toward the top of these ranges: a gate that’s been sagging for years and needs new posts rather than adjustment, automation wiring that has to be trenched under a concrete driveway, or an older iron gate whose welds are failing under layers of paint. Whatever the job, you’ll get a written price before we begin, and that number doesn’t change unless you ask us to add work.
Neighborhoods We Serve in Lynwood
We cover all of Lynwood’s 90262 ZIP code, working throughout the residential blocks on both sides of Long Beach Boulevard and the streets off Imperial Highway. Typical response for a repair call in Lynwood is same-day or next morning, depending on when you call and where our techs are on the route.
- Downtown Lynwood
- East Lynwood
- West Lynwood
- Imperial Heights
- South Lynwood
Service Area – Cities Near Lynwood
Beyond Lynwood, our techs cover the surrounding southeast LA County cities. If you’re in South Gate, CA or Downey, CA, you’re usually within a twenty-minute drive of our East Los Angeles base. Florence-Graham, CA and Compton, CA are also in our regular service loop. Call (833) 620-4315 and we’ll confirm which day we can get a tech to your street.
Serving Lynwood, CA – Our Local Coverage Area
We’re based in the Lynwood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lynwood
Most Lynwood repair calls get a technician the same day or the next morning. If your gate is stuck open or blocked and your driveway or front walk is unsecured, say so when you call (833) 620-4315 and we’ll prioritize the dispatch.
Most standard gate replacements on existing posts do not need a permit in Lynwood. New automated driveway gates and any work that involves new electrical runs can require review depending on the project scope, and we’ll flag that during the estimate, before any work begins.
Yes. We handle automatic pedestrian gates, driveway slide gates, and access systems for landlords and property managers across Lynwood. The same technician who diagnoses the gate can solve the operator, the keypad, and the safety sensors in one visit.
Call Gate Repair East Los Angeles at (833) 620-4315 for a free estimate on any gate job in Lynwood. You’ll speak with someone who knows gates, not a call center.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Lynwood Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Xavier Freeman"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Diego Morales"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Vikram Gupta