Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in East Los Angeles, CA
Gate installation in East Los Angeles usually costs $1,250 to $4,800 for a manual gate and $3,200 to $9,500 for an automated system, depending on material, size, and the condition of the existing posts. Most East LA homes were built between the 1940s and 1970s, which means the original wrought iron and chain link gates have been welded, shimmed, and repainted by multiple generations of the same family before they finally get replaced. That history matters because it changes how we approach every job here. Call us at (833) 620-4315 for a free estimate, and you’ll get a written price before any work starts.
Why East Los Angeles Homes Are Different
East Los Angeles is a dense, predominantly Latino unincorporated community where most homes are mid-century stucco houses on narrow lots with detached garages. The gates here are not decorative afterthoughts. They are working security barriers that get used ten times a day for cars, pedestrians, and package deliveries. Many of the wrought iron and chain link driveway gates we service are original to the property, which means they have survived fifty to eighty years of sun, rain, and daily use.
The dry, warm climate does two things. It accelerates oxidation on unpainted or thinly painted metal, and it dries out wooden gates until they crack along the grain and pull away from their hinges. Then the winter rains arrive and the expansive clay soils under East LA shift, which causes gate posts to lean and gates to drag across the driveway. We see this pattern constantly. A gate that latched fine in September suddenly will not close in February because the post moved half an inch. In East Los Angeles, a sagging gate is not something people ignore. The gate faces the street, and neighbors notice. We routinely work on gates that have been padlocked, rewelded, and repainted by the same family for decades, and our job is to make the repair or replacement hold up under the same conditions that wore out the original.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main East Los Angeles Services
Most calls we get in East Los Angeles fall into two categories: a gate that no longer opens or closes properly, or an electric gate that has stopped responding to remotes, keypads, or sensors. Here is how each one works.
Gate Repair in East Los Angeles
A gate that drags, sags, or will not latch is usually one of three things: hinge wear, post movement in the clay soil, or a weld that has cracked from years of daily use. We start by identifying the root cause before recommending a single repair. On older East LA properties, we often see chain link gates where the tension wire has snapped or the frame has been rewelded so many times that the metal is fatigued. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we already know your equipment when we arrive. Learn more at Gate Repair in East Los Angeles.
Electric Gate Repair in East Los Angeles
Electric gate problems are rarely the gate itself. More often it is the operator motor, the control board, a photo eye that has drifted out of alignment, or a wiring connection that corroded. We diagnose the full system, not just the symptom. On automated gates in East LA, we frequently find that the motor is fine but the limit switches are out of adjustment, or the receiver is not communicating with the remote because of a dead capacitor on the control board. If your gate beeps but does not move, or moves halfway and reverses, those are specific faults we track down fast. See Electric Gate Repair in East Los Angeles for the full scope.
Gate Installation in East Los Angeles
Most East Los Angeles gate installations are replacements for gates that were installed when the house was built, and the job is less about hanging a new gate than about making sure the new one works with the old posts, the uneven driveway, and the way the family actually uses the gate every day. In this area, a new gate has to do double duty: open wide enough for a car, and close securely enough for pedestrian and package security. The dry climate and clay soil mean we pay extra attention to post depth, concrete curing, and hinge alignment before we ever hang the gate itself. If your existing gate has been repaired multiple times and still sags or binds, a properly installed replacement often costs less over five years than continuing to patch the old one. Call (833) 620-4315 and we will measure, quote, and schedule the work, with the full scope covered under our Gate Installation service.
Driveway Gate Installation
Signs you need it
Your current gate drags on the concrete, the hinges are wallowed out, or the frame is so rewelded that the gate no longer sits square in the opening.
What it costs in East Los Angeles
A manual driveway gate in East Los Angeles typically runs $1,900 to $4,800 installed, while an automated driveway gate runs $4,200 to $9,500 depending on operator brand and access controls.
How we do it
We pull the old gate, inspect the posts for rot or lean, set or replace posts as needed, weld or bolt the new frame, hang it on greasable hinges, and adjust the latch and drop rod before we call the job done.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your property has limited swing clearance, or you have a cantilever or track gate that has seized because the rollers wore flat and the track filled with debris.
What it costs in East Los Angeles
Sliding gate installation in East Los Angeles typically starts around $3,500 for a basic manual cantilever and runs $5,500 to $11,000 for an automated sliding system with a rack and pinion drive.
How we do it
We set the track or cantilever rollers on a reinforced footing, build the gate frame to the right weight and length, install the drive motor and rack, and set the limit switches so the gate stops exactly where it should every cycle.
What Gate Installation Costs in East Los Angeles
| Item | Typical range in East Los Angeles |
|---|---|
| Manual driveway gate | $1,900 – $4,800 |
| Automated driveway gate | $4,200 – $9,500 |
| Sliding gate with automation | $5,500 – $11,000 |
How long does gate installation take in East Los Angeles?
A manual gate install is usually one day once materials are on site. An automated gate takes one to two days, plus a short follow-up for sensor fine-tuning after the concrete cures.
Do you handle the power run and safety edges?
Yes. We run conduit and wiring for the operator, install photo eyes and safety edges, and set the force limits so the gate reverses on obstruction. The full electrical scope is part of our automated gate installation.
Brands We Service in East Los Angeles
We work on FAAC, BFT, Linear, and Viking systems regularly in East Los Angeles, along with LiftMaster, DoorKing, Ghost Controls, Elite, and Mighty Mule. Because we stock common control boards, remotes, and sensors locally, most repairs do not wait on a parts order. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in East Los Angeles, CA
| Service | Typical range in East Los Angeles |
|---|---|
| Gate repair diagnostics | $75 – $150 |
| Hinge replacement (manual gate) | $150 – $350 |
| Gate frame rewelding | $200 – $600 |
| Latch and lock replacement | $85 – $220 |
| Electric gate operator motor replacement | $450 – $1,200 |
| Control board replacement | $250 – $700 |
| Photo eye or safety sensor replacement | $150 – $350 |
| Remote and receiver programming | $75 – $200 |
| Manual driveway gate installation | $1,900 – $4,800 |
| Automated driveway gate installation | $4,200 – $9,500 |
In East Los Angeles, the biggest price drivers are post replacement, soil correction, and whether the existing electrical feed can be reused. Posts set in expansive clay often need deeper footings, and that labor shows up in the quote. Every price we give is quoted and agreed before any work starts, so the number on your written estimate is the number you pay.
Neighborhoods We Serve in East Los Angeles
We cover the full East Los Angeles area, from the commercial corridors along Whittier Boulevard to the residential streets that run up toward the hills. Most of our calls come from the older single-family neighborhoods where gated driveways are the norm, not the exception.
- Belvedere
- City Terrace
- Eastmont
- Saybrook Park area
- Whittier Boulevard corridor
Response across East Los Angeles is typically same-day for emergency gate failures, and we schedule installations within the week in most cases.
Service Area – Cities Near East Los Angeles
Beyond East Los Angeles, we regularly work in Monterey Park, CA, Pico Rivera, CA, South Gate, CA, and Downey, CA. If you are on the edge of East LA or just across the city line, call and we will let you know if we cover your street.
Serving East Los Angeles, CA – Our Local Coverage Area
We’re based in the East Los Angeles area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in East Los Angeles
No. Estimates are free. We come out, look at the gate, posts, and any electrical, and hand you a written price. That price is locked before we start, so there is no surprise at the end.
Most gate repairs and like-for-like replacements need no permit because East Los Angeles is unincorporated and the County of Los Angeles generally treats them as maintenance. New automated systems with new electrical runs sometimes do. We will tell you honestly whether your project triggers anything, and handle the paperwork if it does.
Yes. We match common East LA styles, including traditional wrought iron with spear tops, chain link with privacy slats, and the flat-top box frame styles common on 1950s and 1960s homes. If you are replacing one side of a double gate, we match the existing panel as closely as current materials allow.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What East Los Angeles Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Diego Morales"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Vikram Gupta"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Scott Ziegler