Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lynwood
An electric gate that won’t open creates a real problem in Lynwood fast. When your driveway gate stops responding or your slide gate binds halfway, you need a technician who knows the specific failure patterns common to homes in the 90262 area, not someone driving in blind from across the county. Our gate specialists diagnose the root cause – motor, control board, sensor, or wiring – before we recommend a single repair. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, which covers most of what’s installed across Lynwood. Call (833) 620-4315 for a free estimate on your Electric Gate Repair.
Why Gate Repair East Los Angeles Is Lynwood’s Preferred Electric Gate Repair Company
Lynwood homeowners call us because we understand what their gates are up against. The city’s tight postwar lots mean most gates sit close to the street on narrow frontages, and the prolonged dry summers shift the soil around post footings. That combination creates sagging slide gates and binding swing gates that a generalist will misdiagnose as a motor problem. Our technicians re-level posts, reset tracks, and rebuild worn hardware instead of selling you a replacement you don’t need.
Ruben Acosta leads our team and has trained our techs to recognize the layered-repaint problem we see constantly in Lynwood: older iron gates that have been painted over so many times that failing welds and worn rollers are completely hidden. We catch those during diagnosis. It’s the difference between a repair that lasts and one that fails again in six months.
When a Lynwood customer calls with a gate stuck open or a motor that hums but won’t move, the Electric Gate Repair in Lynwood response comes from a team already familiar with the local housing stock. We know Fernwood Avenue lots, the alleys off Imperial Highway, and the shared side drives where a broken gate can block a neighbor’s entire morning.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Electric Gate Motor in Lynwood
Electric gate motor repair in Lynwood typically runs $275 – $650 depending on whether we’re replacing a capacitor, a full motor, or the control board that drives it. The motor is the workhorse of your automated gate, and in 90262’s dry, warm climate, the most common failure is a worn rack and pinion or UV-degraded safety sensors – not rust. When your gate grinds but moves slowly, or the motor runs but the gate stays put, that rack and pinion is usually the culprit.
Symptom: Motor hums, gate doesn’t move
On slide gates in Lynwood, the motor spinning with no gate movement almost always points to a stripped gear or a rack that’s pulled away from a shifting post. We’ve seen this repeatedly on gates off Martin Luther King Jr. Boulevard and the numbered streets east of Long Beach Boulevard. The fix is often less expensive than a full motor replacement, which is good news for budget-conscious homeowners across the city.
Symptom: Intermittent operation or reversed function
Intermittent operation is frequently a control board issue combined with degraded sensors, and it’s a genuine entrapment hazard on gates that haven’t been re-tested for UL 325 compliance. If your gate reverses suddenly or won’t close properly, that’s not something to live with. Our techs test every safety input before we finish a motor repair in Lynwood.
Gate Access Control in Lynwood
Gate access control installation in Lynwood runs $180 – $480 for a keypad or remote receiver upgrade, and $600 – $1,400+ for a fuller system with telephone entry or multiple credential types. Many older Lynwood homes have automatic gates that were installed with basic remote-only operation, and adding a keypad or integrating a garage remote makes daily access far more practical. We identify the root cause of any access failure first – a dead keypad, a receiver that’s dropped programming, or a wiring short at the post – before replacing anything.
Adding a keypad to an existing gate
If you’re adding keypad entry to a gate on a Lynwood property, the work involves wiring from the operator to the keypad post, programming access codes, and positioning the keypad so it’s reachable from a car window but shielded from direct afternoon sun. On narrow frontages, placement matters more than people expect.
Repairing older access systems
Older gate operators in Lynwood, especially LiftMaster and FAAC units installed ten or more years ago, often fail at the receiver board. The easiest fix is usually receiver replacement rather than a full operator swap. We’ll steer you toward the option that costs less and keeps your existing hardware in service when that’s the smart call.
Trusted Brands We Service in Lynwood
We keep your gate working no matter which brand is installed on your Lynwood property. Our techs carry parts and know the failure patterns for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing repair in Lynwood, Elite, and Mighty Mule, so the truck shows up with the right diagnostics and common components for the systems we see most often across the city. That brand knowledge saves you from a parts-fishing expedition that wastes time and adds labor hours. We work on your brand.
Common Electric Gate Repair Problems We See in Lynwood Homes
- Sagging slide gates on shared drives: Lynwood’s dry summers shrink the soil around post footings, and a sagging slide gate can block a neighbor’s alley access overnight. We re-plumb posts and reset tracks to restore clearance without a full replacement.
- Layered repaint hiding failed welds: Many older wrought-iron gates in 90262 carry so many layers of repaint that cracked welds and worn hinge hardware are invisible until the gate binds or the latch stops aligning. We strip back test areas to inspect what’s underneath.
- UV-degraded safety sensors and photo eyes: The unshaded south-facing gates across Lynwood get hit hard by direct sun, and that deteriorates sensor housings and lenses over time. A gate that won’t close is often a photo-eye issue, not a motor failure.
- Worn rack and pinion on older operators: LiftMaster and FAAC slide gate operators installed on the era of tract homes that dominate Lynwood’s streets eventually wear the rack teeth or drive gear, causing grinding and jerky movement that only gets worse.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Lynwood, CA
You’ll get a written, agreed-upon price before we start any repair, every time. Here’s what to expect in Lynwood for common electric gate work: diagnostic service call $89 – $125, keypad replacement $180 – $320, safety sensor or photo-eye replacement $150 – $300, control board replacement $350 – $650, motor capacitor or gear $275 – $480, and full operator replacement $900 – $1,800 depending on brand and power. On tighter Lywood lots with slab or stucco surfaces, running power can add a few hundred to access control work. It’s all quoted upfront. Call (833) 620-4315 for a free estimate.
We Also Serve Cities Near Lynwood
Our gate repair team covers all of Lynwood and the surrounding Southeast LA County area. If you’re in South Gate, Downey, Florence-Graham, or Compton with a gate that won’t operate, we can usually reach you the same day or next morning. The Lynwood page covers home-specific gate failures, but the service is the same across the region.
Serving Lynwood, CA – Our Local Coverage Area
We’re based in the Lynwood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lynwood
Yes, and that’s exactly the kind of repair we do most often in Lynnwood. The fix is re-plumbing the hinge or roller post and resetting the slide track rather than replacing the gate. On narrow alleys and shared drives, this restored clearance is usually faster and far less expensive than a full replacement. Call (833) 620-4315 and we’ll assess the post footing and track alignment first.
Your gate operator should have a UL 325 listing label on the control box, and the installed safety devices – photo eyes, edge sensors, and reversal mechanisms – were required at the time of installation. Many older Lynwood gates have never been re-tested since install, and one of the first things our techs check on any automatic gate repair in Lynwood is entrapment protection. If the label is missing or the system won’t reverse on obstruction, it’s a genuine safety issue we’ll correct.
On Lynwood slide gates, the most common causes are a worn rack and pinion, a stripped drive gear inside the operator, or a broken chain/belt. We recently repaired a LiftMaster slide gate off Fernwood Avenue where the rack was so covered in paint from repeated repainting that the worn teeth were hidden from view. Our tech re-plumbed the hinge post and reset the track rather than replacing the gate, then tested the safety photocell to ensure UL 325 compliance. That same pattern plays out all over town.
Yes, and we do that as a primary service. Adding a keypad costs about $180 – $480 depending on whether it’s stand-alone or integrated with your operator. If you want phone app control or multi-code management, we’ll quote that separately. The work can usually be completed in a single visit, and the placement of the keypad post or box on a narrow Lynwood driveway is something we’ll position carefully for reachable daily use.
Lynwood’s dry months shrink the soil around gate post footings, which shifts the posts just enough to bind a swing gate or drag a slide gate off its track. It’s the most predictable seasonal gate failure we see in 90262, and the correction is re-leveling and resetting rather than replacing hardware. In most cases, we can stabilize the post with proper compaction and adjustment in one afternoon. Call us for a free estimate.
Schedule Your Lynwood Electric Gate Repair Today
If your gate is stuck, binding, or not responding to remotes or keypads, we’ll send a gate specialist who knows exactly what to check on the homes and drives of Lynwood. We’re familiar with the properties along Atlantic, Fernwood, and the neighborhoods behind the civic center, and we’ll quote you honestly, fix the root cause, and leave the gate tested and smooth. Call (833) 620-4315 now for a free estimate. We look forward to earning your trust.
Written by Ruben Acosta, Owner at Gate Repair East Los Angeles, serving Lynwood and surrounding communities.