Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Compton, CA
Gate installation in Compton usually runs between $1,800 and $7,500 depending on whether we’re hanging a single manual driveway gate or building a fully automated sliding system with access control. Most Compton jobs involve replacing gates that have failed at the hinges or posts on mid-century stucco tract homes and low-rise multifamily properties, where decades of coastal marine air have done real damage to the original iron and steel. If you need a gate built, repaired, or automated, call Gate Repair East Los Angeles at (833) 620-4315 and we’ll give you a straight answer on what it takes.
Why Compton Homes Are Different
Compton’s gate work follows the housing stock. Most of the city was built between the 1950s and 1970s, which means single-story stucco tract houses and low-rise apartment buildings with concrete driveways and perimeter iron or chain-link fencing. The gates on those properties are typically original to the build: ornamental iron welded on-site, or chain-link hung on steel posts set directly into concrete. Sixty years of morning dampness and salt-laden onshore air from the coastal marine layer has thinned the metal at the weld joints and rusted the posts below the concrete line. When a gate fails in Compton, it’s rarely just a hinge. We find that the post itself has rotted or cracked, and the slab around it needs to be broken out and re-poured before anything new gets hung. That changes the scope of the job and the honest price of it.
Compton also has a high ratio of rental properties, which means gate repairs are often driven by landlord timelines and code enforcement rather than a homeowner’s convenience. When a City inspector flags a broken gate on a multifamily property, the owner needs it fixed fast and documented properly. We understand that pressure and we quote accordingly: the price you approve is the price you pay, with nothing added after the fact.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Compton Services
These are the two calls we get most from Compton homeowners and property managers, each with its own dedicated page covering the specifics.
Gate Repair in Compton
When a gate stops closing, drags on the concrete, or won’t latch, the cause is usually rust at the hinge welds, a post that’s shifted in cracked concrete, or a latch that’s worn past adjustment. In Compton’s older neighborhoods off Rosecrans and Compton Boulevard, we regularly see original 1950s and 60s ornamental iron gates failing at the weld joints, where decades of marine air have thinned the metal to the point that grinding and re-welding is the only real fix. Our technicians identify the root cause before recommending a single repair. For the full breakdown on repair scope, costs, and turnaround, see Gate Repair in Compton.
Electric Gate Repair in Compton
An automated gate that won’t open, opens halfway, or reverses for no reason is a different animal entirely. Electric systems fail at the operator motor, the control board, a sensor, or the wiring between them. Compton’s coastal dampness accelerates corrosion on low-voltage connections and limit switches, especially on older operators that were installed before sealed circuit boards became standard. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so we diagnose your specific brand rather than guessing at it. See Electric Gate Repair in Compton for a detailed look at motor, board, and sensor work.
Gate Installation in Compton
New gate installation in Compton typically costs $1,800 to $7,500, and the spread comes down to whether you need a manual gate hung on existing posts or a full automated system with new posts, a motor, and access control. Most Compton installations are replacements: the original gate from the 1950s or 60s has rusted beyond repair or the post has failed in cracked concrete, and the smart move is to build fresh rather than patch. We handle the entire job, from removing the old gate and re-setting posts to wiring the operator and programming your entry system. Our team has installed and serviced gates across Compton for years, and we quote every job before any work begins so you know the full cost up front. For a wider look at what’s involved, see Gate Installation.
Automatic Gate Installation
Signs you need it
You want to open and close your driveway gate without leaving the car, or your current manual gate is too heavy to operate easily.
What it costs in Compton
Expect $2,800 to $7,500 in Compton, depending on gate length, weight, and whether you choose a slide or swing operator.
How we do it
We survey the driveway and gate clearance, recommend the right operator for the load, set the posts, hang the gate, mount and wire the operator, and test the full cycle with your remotes and keypad.
Electric Gate Installation
Signs you need it
You want a gate that runs on power and can be controlled by remote, keypad, or intercom, instead of pushing it open by hand.
What it costs in Compton
Budget $2,800 to $7,500 for a complete electric gate installation, with the final figure tied to the operator type and access system you choose.
How we do it
We build the gate to spec, install the operator and control board, run the power and low-voltage wiring, program your remotes and safety edges, and verify the system cycles correctly before we leave.
Driveway Gate Installation
Signs you need it
Your current driveway gate is sagging, rusted through, or too narrow for the vehicles you drive now.
What it costs in Compton
Most driveway gate installations in Compton land between $1,800 and $4,500 for a single manual gate, and $2,800 to $7,500 when automated.
How we do it
We measure the driveway opening, check the concrete and any slope, build or order the gate to your dimensions, re-set posts if needed, and hang everything level and square.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the street and a swing gate would drag, or you have a wide commercial-style entry that a swing gate can’t span.
What it costs in Compton
Sliding gate installation in Compton runs $3,200 to $7,500, with track or cantilever systems at the higher end of that range.
How we do it
We set the track or build the cantilever frame, install the gate to roll cleanly, add a slide operator if you want it automated, and set stops and safety edges.
What Gate Installation Costs in Compton
| Item | Typical range in Compton |
|---|---|
| Manual driveway gate installation | $1,800 – $4,500 |
| Automatic gate installation | $2,800 – $7,500 |
| Sliding gate installation | $3,200 – $7,500 |
How long does a gate installation take in Compton?
Most manual gate installations in Compton take one day. An automated system with new posts, a control board, and access wiring usually runs two to three days including concrete cure time and programming.
Can you install a gate on my existing posts in Compton?
Sometimes. If the posts are straight, rust-free at the base, and set in sound concrete, we can hang a new gate on them. In Compton, where original posts are often rusted below the concrete line, we usually recommend replacing them while the driveway is open.
Brands We Service in Compton
We work on LiftMaster, FAAC, BFT, and Linear systems, which covers the operators and hardware most Compton homes and small multifamily properties actually have installed. We stock common control boards, remote receivers, safety edges, and hinge and latch parts for these brands locally, which means most repairs don’t wait on a parts order. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Compton, CA
| Service | Typical range in Compton |
|---|---|
| Gate repair (minor hinge or latch work) | $150 – $400 |
| Gate repair (post re-setting or weld work) | $300 – $800 |
| Electric gate repair (sensor or limit switch) | $180 – $420 |
| Electric gate repair (control board or motor) | $450 – $1,400 |
| Manual driveway gate installation | $1,800 – $4,500 |
| Automatic gate installation | $2,800 – $7,500 |
| Sliding gate installation | $3,200 – $7,500 |
| Gate operator replacement | $650 – $1,800 |
What pushes a Compton gate job toward the top of those ranges is usually the post condition. When rust has eaten through the steel below the concrete line, we’re breaking out the old slab, pouring a new footing, and re-setting the post before we even touch the gate itself. That’s real work and it’s priced honestly. Every quote is given up front and agreed before we start, so the number on the estimate is the number on the invoice.
Neighborhoods We Serve in Compton
We work across all of Compton’s ZIP codes, 90220 through 90223, from the older residential blocks near Rosecrans and Compton Boulevard to the multifamily pockets off Alameda and Central. Most of the city is within a 30-minute drive of our shop, so we can typically have a technician on site the same day for emergency gate failures that are blocking a driveway or leaving a property unsecured.
- Downtown Compton and Compton Boulevard corridor
- Rosecrans neighborhoods
- Alameda corridor multifamily properties
- Central Compton residential blocks
- South Compton near the 91
Service Area – Cities Near Compton
In addition to Compton, our technicians regularly handle gate repair and installation in the surrounding LA Basin cities. We cover Carson, CA to the south, Lynwood, CA to the northeast, Lakewood, CA to the east, and South Gate, CA to the north. If you’re on the border between cities, call us and we’ll confirm coverage for your street.
Serving Compton, CA – Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Compton
Most Compton addresses are within 30 minutes of our shop. For a gate that’s stuck open, stuck closed, or blocking a driveway, we prioritize same-day dispatch and will give you a realistic arrival window when you call.
Most residential gate replacements on existing posts don’t require a permit in Compton, but new automated systems with electrical work or gates that change the driveway approach may need City approval. We can tell you what applies to your specific property and handle the paperwork if a permit is required.
Yes. We work regularly with Compton landlords and property managers on code-enforcement repairs, tenant-safe entry systems, and gate replacements on multifamily properties. We can quote the job with the documentation your property records need, and we schedule around tenant access so the work gets done without dragging on.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Compton Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Diego Morales"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Vikram Gupta"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Scott Ziegler